Intelligent Switch & Distribution System 9611B
- Product Information
- Key Features
- Datasheets
- Request a quote
Product Information
The 9611B switch and distribution system is an intelligent switching, monitoring and distribution system, packaged in a 1U rack-mount chassis.
Support for Multiple Signal Formats
The 9611B can be set up to distribute a wide range of signal formats; low noise sine waves, IRIG timecodes or pulse formats from either one of two inputs to all 12 outputs. The 9611B allows the user to deploy one model type to support multiple signalling formats which lowers support and logistics costs.
Detecting Input or Output Failures
Providing for both manual and auto-switching signal distribution, when in auto-switching mode, the 9611B will detect any input or output failure based on the signal type being propagated. In the auto mode, any input failure causes the unit to switch from primary to secondary source. Alarms will be indicated by all user interfaces including the front panel and command line interface.
Key Features
- Automatic selection of redundant inputs
- 12 ouputs
- Flexible signal configuration
- RS-232 control port
- High channel isolation
- Distributes multiple signal types: RF 100 Hz-10 MHz AM and DC IRIG timecode
- Comprehensive alarm reporting
- CE/UL compliant
The Chronos difference
Please contact our team for specialist advice, support and for more information.
Key Features
- Supports IRIG time codes, pulse formats and low noise sine waves
- Enables redundant inputs: when in auto switching mode, it detects input failure and automatically switches to the redundant input without signal loss
- 12 outputs: low noise, high isolation amplifiers allow for 12 copies of each input to be distributed without degradation of downstream equipment enabling system designers to reliably distribute highly accurate RF time codes and 1pps signals
- Front panel controls: when one input fails an alarm will indicate such failure through the front panel controls and indicators
- Command line interface: the 9611B has a serial port interface that supports communication programs with a PC
- RoHS compliant
Sync and Timing
Related Products
- 5071B Cesium Atomic Clock
- CSAC SA65 Chip Scale Atomic Clock
- Active Hydrogen Maser MHM-2020 and Auxiliary Output Generator AOG-110
- Rubidium Frequency Standard 8040C
- Intelligent Switch & Distribution System 9611B
- SyncSystem 4380A
- Express Timing Module bc635PCIe (IRIG)
- Express Timing Module bc637pcle (GPS)
- 5071A Cesium Clock
- Replacement Cesium Beam Tubes
Time As a Service (TaaS): Still a work in progress?
At several points over the last 20 years, I’ve thought that Time as Service (TaaS) was a no brainer.…
